Andriod Codes

Andriod All Codes

Secret tricking codes for Android Mobile Phones:

1. Complete Information About your Phone

*#*#4636#*#*
This code can be used to get some interesting information about your
phone and battery.It shows
following 4 menus on screen:
*. Phone information
*. Battery information
*. Battery history
*. Usage statistics

2. Factory data reset

*#*#7780#*#*
This code can be used for a factory
data reset . It'll remove following
things:
*. Google account settings stored in
yourphone
*. System and application data and
settings
*. Downloaded applications
It'll NOT remove:
*. Current system software and
bundled application
*. SD card files e.g. photos, music
files, etc.
Note: Once you give this code, you
get a prompt screenasking you to
click on "Reset phone" button. So
you get a chance to cancel your
operation.

3. Format Android Phone

*2767*3855#
Think before you give this code. This
code is used for factory format . It'll
remove all files and settings
including the internal memory
storage. It'll also reinstall the phone
firmware.
Note: Once you give this code, there
is no way to cancelthe operation
unless you remove the battery from
the phone. So think twice before
giving this code.

4. Phone Camera Update

*#*#34971539#*#*
This code is used to get information
about phone camera. It shows
following 4 menus:
*. Update camerafirmware in image
(Don't try this option)
*. Update camerafirmware in SDcard
*. Get camera firmware version
*. Get firmware update count

WARNING: Never use the first option
otherwise your phone camera will
stop workingand you'll need to take
your phone to service center to
reinstall camera firmware.

5. End Call/Power

*#*#7594#*#*
This one is my favorite one. This
code can be used to change the "
End Call / Power " button action in
your phone. Be default, if you long
press the button, it shows a screen
asking you to select any option from
Silent mode, AirPlane mode and
Power off.
You can change this action using
this code. You can enable direct
power off on thisbutton so you don't
need to waste your time in selecting
the option.

6. File Copy for Creating Backup

*#*#273283*255*663282*#*#*
This code opens a File copy screen
where you can backup your media
files e.g. Images, Sound, Video and
Voice memo.

7. Service Mode

*#*#197328640#*#*
This code can be used to enter into
Service mode. You can run various
tests and change settings in the
service mode.

8. WLAN, GPS and Bluetooth Test

Codes:
*#*#232339#*#* OR *#*#526#*#*
OR *#*#528#*#* - WLAN test (Use
"Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC
address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth
device address

9. Codes to get Firmware version information:

*#*#4986*2650468#*#* - PDA,
Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC,
Build Time, Changelist number

10. Codes to launch various Factory Tests:

*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* -
Melodytest
*#*#0842#*#* - Device test
(Vibration test and BackLight test)
*#*#2663#*#* - Touch screen
version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor
test
*#*#3264#*#* - RAM version


plz try @ ur own risk............

Bypass pattern lock on android

How to bypass pattern lock on android

Pattern lock can be easily byapssed on android using your email but what if
you forgot your email password too
here is a cool trick to unlock the pattern ..

Method 1

* Connect your device with the computer via USB cable

* Open Command Prompt and key in the exact code as displayed below:

adb shell
cd /data/data/
com.android.providers.settings/
databases
sqlite3 settings.db
update system set value=0 where
name='lock_pattern_autolock';
update system set value=0 where
name='lockscreen.lockedoutpermanently';
.quit

* Reboot your device

* You may now unlock your device providing whatever pattern you like ...

Method 2

If the above method doesn't work,
try using the following code instead:

adb shell rm /data/system/
gesture.key
Bypass-Android-Pattern-Unlock2-PC
After rebooting, unlock your device
using ay preferred pattern. As
evident from the above, neither
method disables the pattern unlock.
Instead, they just nullify the pattern
order on the lock screen

Both methods have successfully been tested using a combination of HTC Desire Z (running CyanogenMod 7.2) and Windows 7 (64-bit Edition), and a good thing about these solutions is that they work independent of, as well as in tandem with, each other, so no harm in deploying them both simultaneously.

Once you regain access in to the OS, head over to the system security settings, reselect your preferred unlock method, and you're good to go.

Bypass Surveys

Bypass Surveys from anysite - 2 Best ways

Sometimes you face a serious problem when surfing the Internet. When you visit a website and you are about to see the
content, you are asked to complete a survey.
Those surveys are very annoying and some of them are CPA/CPL (which means: you have to pay ). Instead of taking a survey,
you can bypass them with simple clicks, here I'm going to show you 2 ways to bypass surveys on any Website including ShareCash.
2 Ways to Bypass Surveys on Any Website

Method 1 (Using Javascript)

Disabling Javascript on Web-Browsers will make surveys never appear:

Google Chrome:

1) Click on Settings' Wrench on the top right of Google Chrome.
2) Click Options.
3) Scroll down, and Click Advanced system Settings
4) Click on Content Settings to show options of Google Chrome web page content.
5) Under Javascript section check the box: Do not allow any site to run Javascript
6) Done! Now just go the website
that asks for surveys and you'll bypass them.
Firefox:
On Firefox you can use this simple Add-on called QuickJava to disable and enable Javascript fast.

Download it QuickJava.

Note : This method doesn't work for all websites, like Sharecash : it
will prompt you that you have disabled Javascript, Check Method
2 that works for all Websites.

Method 2 (Using Inspect Element)

1) When you are prompted to take
a survey, Right Click the title and Click Inspect Element

2) Now keep pressing Delete button to delete scripts on Inspect Element tab, until Complete a Survey disappear.

3) After the bar disappear, keep deleting until the Page go lighter (whiten) with no dark area.

4) Done! Now you'll see your full content or download on Sharecash.

Delete administrator Password

How to "Delete administrator Password" without any software

Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.


Method 2

Step 1. Put your hard disk of your computer in any other pc .

Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).

Step 3. Then open that drive in which the victim’s window(or your window) is installed.

Step 4. Go to location windows->system32->config

Step 5. And delete SAM.exe and SAM.log 

Step 6. Now remove hard disk and put in your computer.

Step 7. And boot your computer

KEYLOGGER

                                                                   KEYLOGGER

Using Ardamax Keylogger
Download Ardamax Keylogger 2.8 from here: http://www.ardamax.com/[Register it to get the key]

Once you downloaded Ardamax open "setup_akl.exe".Install Ardamax on your PC (it will record all you'll type until you uninstall it).

Installing Aramax:-
-So, double click on "setup_akl.exe". In the new window (about the License Agreement), click on "I Agree".
-Be sure the 3 boxes are tick and click on "Next".
-Choose a new installation path or leave this one, and click "Install" (Ardamax is now installing).
-Once it's done, untick "View the Quick Tour" and press on "Finish".

Infecting a file

-In the new window, click on "Enter Key" and enter the name and serial, then press "OK".
-If everything went fine, the window should have close and now you'll have to do a right click on the Ardamax icon in the tray bar (in the right bottom corner of your screen), then click on "Remote Installation...".
-A new screen will open and you'll have to click on "Next".
-Tick the "Append keylogger engine to file or another application" and click on "Browse". Now, you'll have to browse for the file or the application you want to infect. It can be anything, and, don't worry, the file won't be infected (Ardamax will make a copy of it and leave the one you chose intact). So, when someone will double click on this file, Ardamax will be install on his PC (He won't see any Ardamax installation or w/e window and probably never know he's infected). Once you choosed the file, click on "Open".
-In the same window ("Appearance"), leave "Installation folder on target computer" the same, and under "Additional components", untick "Log Viewer" (untick all) and click on "Next".
-In "Invisibility" window, leave all options tick, click on "Next".
-Now, click on "Enable..." and in the window that popuped, enter a password. Leave all the options tick, and click on "Next".
-Untick "Check for updates" and click on "Next".
-Leave the 2 options tick, and I suggest to change the "Hidden mode on:" to something easier to remember (such as ctrl+z). Also, I would put a "Self destruct on:" date (you have to tick the box beside the date, scroll down and choose a date) this will uninstall Ardamax on the remote PC on the date you choosed)) such as a week later (or until you're sure you know what you want to). Click on "Next".
-Now, in the new window ("Control"), tick "Send logs every" and, right beside, choose the frequency of the logs you'll receive (usually 1/hour or 1/day is fine).

-In the same window ("Control"), under "Delivery method", select (tick) "FTP" and untick "Email". This will send all the logs to your website instead of an email address, it make easier and faster to see the logs in my opinion.
-Again in the same window, leave all the other fields the same, but untick "Send only if log size exceeds". Click on "Next".
-You're now in the "FTP" window. If you don't already have a website (such as mine: http://www.bambellz.110mb.com) you need to make one. You can follow my tut about pishing sites: *Woha, dead link, too lazy to re-post* and stop after you deleted "index.htm". Once you have a website, you'll have to enter it's address (ex: http://www.bambellz.110mb.com) in "FTP Host:". Under "Remote Folder:" simply enter "/" and enter the username and password of the website (the one you use to login in http://www.110mb.com). After that, click on "Test", if everythin went fine, a window witn the message "The Ardamax Keylogger test FTP delivery has been completed succesfully". Click on "OK", and then "Next".
-Select the options you want (I suggest to leave all them tick), and press "Next".
-If you choosed to take screenshot, now select the frequency of them (I think 1/15min is fine), select "Full Screen" and put the quality to the maximum, press on "Next".
-Leave these fields intact, but, I stongly suggest to change the icon to whatever you want (click on "Change Icon" and look for one you want, you can also click on "Browse..." and browse for what you want) when you chosed it, press on "OK". Press on "Next".
-Now, press on "Finish". If everything went fine, a window with the message "Deployment package created succesfully." appear, press "OK".

Using the infected file