How to Break a BIOS Password (for laptop and pc).

Methods of breaking password for Desktop PC and for laptop is quite different.

I would explain each.

Break BIOS Password for Desktop : 

If it's a desktop PC, erasing the cmos memory will usually clear it.

Steps:

1. Power off the computer and make sure that it is unplugged.

2. Open up your computer case. You need physical access to the motherboard to complete this procedure.

3. Find a circular, (mostly) silver metallic object on the motherboard.This is the CMOS battery.

4. CAREFULLY remove the CMOS battery and leave it out for about 120- 180 seconds. This will flush the     CMOS memory which stores the BIOS password and all other configuration.

5. Set the battery back into place and power on the computer.

6. The computer should then warn you that the CMOS configuration could not be found. You can either       

    reconfigure it yourself or restore defaults. Restoring the default configuration should be fine.

7. You will notice that the BIOS password has been cleared and you can boot without it. You may reset the      BIOS password to something else bygoing into the BIOS configuration and setting a new User          

     Password.

Alternate Methos: (More Dificult)

Remove a jumper: 

            There's a jumper on your motherboard that you'll need to identify and remove. Most motherboards make your job easier by actually labeling the correct jumper as"BIOS config" or something similar. (it looks like a small plastic thingy on 2 pins with 1 pin beside

it, within a 1" of the battery). If you're having trouble looking for it, look in the motherboard manual.

After you have found it, carefuly pull straight up on it, and place it on the 2-3 pins(it was on the 1-2 pins). With the battery removed and the jumper moved, turn the computer on, and check to see if you can get into the bios. If you are able to, turn the computer off, put the jumper back on pins 1-2, and 

put the battery back in.

Lastly put the case together and you are done. 

Note: Don't forget to configure the BIOS (if you know how) after this process. If you you don't know how,

just hold the "delete" button when starting your PC and when the blue screen appears, find the load safe defaults settings and press:

*. ENTER button

*. Y button

*. F10 button 

Break BIOS Password for Laptop : 

Remember that laptops can be trickier, especially if it's a newer model. If it has a security chip on the motherboard forget about it. You either have to physically remove the chip or contact the mfg for the "master" password.

If you can boot up off of a cd or floppy try any of these methods:

1. Create a Win98SE bootable media

    "or anything that lets you boot into MS-DOS" and boot off of it.

2. When the A:\> prompt appears type debug and press enter.

3. You will then only see a "-".

4. Type o 70 2E "include the spaces"    and press Enter.

5. Type o 71 ff "include the spaces"   and press Enter.

6. Type q and press Enter.

7. Here are a list of common manufacturer backdoor passwords

*. AWARD BIOS

AWARD SW, AWARD_SW, Award SW,

AWARD PW, _award, awkward, J64,

j256, j262, j332, j322, 01322222,

589589, 589721, 595595, 598598, HLT,

SER, SKY_FOX, aLLy, aLLY, Condo,

CONCAT, TTPTHA, aPAf, HLT, KDD,

ZBAAACA, ZAAADA, ZJAAADC,

*. AMI BIOS

AMI, A.M.I., AMI SW, AMI_SW, BIOS,

PASSWORD, HEWITT RAND, Oder

KEYLOGGER

                                                                   KEYLOGGER

Using Ardamax Keylogger
Download Ardamax Keylogger 2.8 from here: http://www.ardamax.com/[Register it to get the key]

Once you downloaded Ardamax open "setup_akl.exe".Install Ardamax on your PC (it will record all you'll type until you uninstall it).

Installing Aramax:-
-So, double click on "setup_akl.exe". In the new window (about the License Agreement), click on "I Agree".
-Be sure the 3 boxes are tick and click on "Next".
-Choose a new installation path or leave this one, and click "Install" (Ardamax is now installing).
-Once it's done, untick "View the Quick Tour" and press on "Finish".

Infecting a file

-In the new window, click on "Enter Key" and enter the name and serial, then press "OK".
-If everything went fine, the window should have close and now you'll have to do a right click on the Ardamax icon in the tray bar (in the right bottom corner of your screen), then click on "Remote Installation...".
-A new screen will open and you'll have to click on "Next".
-Tick the "Append keylogger engine to file or another application" and click on "Browse". Now, you'll have to browse for the file or the application you want to infect. It can be anything, and, don't worry, the file won't be infected (Ardamax will make a copy of it and leave the one you chose intact). So, when someone will double click on this file, Ardamax will be install on his PC (He won't see any Ardamax installation or w/e window and probably never know he's infected). Once you choosed the file, click on "Open".
-In the same window ("Appearance"), leave "Installation folder on target computer" the same, and under "Additional components", untick "Log Viewer" (untick all) and click on "Next".
-In "Invisibility" window, leave all options tick, click on "Next".
-Now, click on "Enable..." and in the window that popuped, enter a password. Leave all the options tick, and click on "Next".
-Untick "Check for updates" and click on "Next".
-Leave the 2 options tick, and I suggest to change the "Hidden mode on:" to something easier to remember (such as ctrl+z). Also, I would put a "Self destruct on:" date (you have to tick the box beside the date, scroll down and choose a date) this will uninstall Ardamax on the remote PC on the date you choosed)) such as a week later (or until you're sure you know what you want to). Click on "Next".
-Now, in the new window ("Control"), tick "Send logs every" and, right beside, choose the frequency of the logs you'll receive (usually 1/hour or 1/day is fine).

-In the same window ("Control"), under "Delivery method", select (tick) "FTP" and untick "Email". This will send all the logs to your website instead of an email address, it make easier and faster to see the logs in my opinion.
-Again in the same window, leave all the other fields the same, but untick "Send only if log size exceeds". Click on "Next".
-You're now in the "FTP" window. If you don't already have a website (such as mine: http://www.bambellz.110mb.com) you need to make one. You can follow my tut about pishing sites: *Woha, dead link, too lazy to re-post* and stop after you deleted "index.htm". Once you have a website, you'll have to enter it's address (ex: http://www.bambellz.110mb.com) in "FTP Host:". Under "Remote Folder:" simply enter "/" and enter the username and password of the website (the one you use to login in http://www.110mb.com). After that, click on "Test", if everythin went fine, a window witn the message "The Ardamax Keylogger test FTP delivery has been completed succesfully". Click on "OK", and then "Next".
-Select the options you want (I suggest to leave all them tick), and press "Next".
-If you choosed to take screenshot, now select the frequency of them (I think 1/15min is fine), select "Full Screen" and put the quality to the maximum, press on "Next".
-Leave these fields intact, but, I stongly suggest to change the icon to whatever you want (click on "Change Icon" and look for one you want, you can also click on "Browse..." and browse for what you want) when you chosed it, press on "OK". Press on "Next".
-Now, press on "Finish". If everything went fine, a window with the message "Deployment package created succesfully." appear, press "OK".

Using the infected file

Proxy server

Proxy server 

1. Transparent Proxy - This type of proxy server identifies itself as a proxy server and also makes the original IP address available through the http headers. These are generally used for their ability to cache websites and do not effectively provide any anonymity to those who use them. However, the use of a transparent proxy will get you around simple IP bans. They are transparent in the terms that your IP address is exposed, not transparent in the terms that you do not know that you are using it (your system is not specifically configured to use it.)

2. Anonymous Proxy - This type of proxy server indentifies itself as a proxy server, but does not make the original IP address available. This type of proxy server is detectable, but provides reasonable anonymity for most users.

3. Distorting Proxy - This type of proxy server identifies itself as a proxy server, but make an incorrect original IP address available through the http headers.

4. High Anonymity Proxy - This type of proxy server does not identify itself as a proxy server and does not make available the original

INSTRUCTIONS FOR CHANGING UR IP ADDRESS IN DIFFERENT EXPLORER :

Instructions for Internet Explorer 6.0

1. On the Tools menu in Internet Explorer, click Internet Options, click the Connections tab, and then click LAN Settings.
2. Under Proxy server, click to select the Use a proxy server for your LAN check box.
3. In the Address box, type the IP address of the proxy server.
4. In the Port box, type the port number that is used by the proxy server for client connections (by default, 8080).
5. You can click to select the Bypass proxy server for local addresses check box if you do not want the proxy server computer to be used when you connect to a computer on the local network (this may speed up performance).
6. Click OK to close the LAN Settings dialog box.
7. Click OK again to close the Internet Options dialog box.



Instructions for FireFox

1. Select the Tools Menu
2. Select Options
3. Select Connection Settings
4. Select Manual Proxy Configuration
5. Check Use the same proxy for all protocols
6. Enter the IP address for the HTTP proxy server
7. Enter the port of the HTTP proxy server
8. Click Okay


instructions for Netscape 7.1
1. Select the Edit Menu
2. Select Preferences
3. Maximize Advanced
4. Select Proxies
5. Choose Manual proxy configuration
6. Enter the proxy server's IP address in the HTTP Proxy field and the proxy's port into the corresponding Port field.
7. OK your way out

Opera 8.5

1. Select the Tools Menu
2. Select Preferences
3. Select Advanced Tab
4. Select Proxy Servers
5. Check the box next to HTTP
6. Enter the proxy server's IP address in the first box and the proxy's port in the box after "Port"
7. OK your way out

Safari 2.0.3

1. Select Preferences
2. Select Advanced
3. Select Proxies: Change Settings
4. Check the box next to Web Proxy (HTTP)
5. Enter the proxy server's IP address in the first box and the proxy's port in the box after the ":"
6. Select Apply Now

SNIFFING - Hack any Lan or Wi-Fi Arena

SNIFFING - Hack any Lan or Wi-Fi Arena

Sniffing [d way 2 hack any lan or wi=fi arena]

THEORY PART


definition of sniffing->get it 4m google ,i can give u only a idea.
by sniffing u can Hack any lan or wi fi arena.
all d person wHo r doing vatever on der computer at dt instant,vl display on ur computer,vd full image vd full description vl every pressed single key .


cool naa?


just run 2 delHi,u vl find der some wi fi enabled bank.
Hey u can Hack dem all,
no institute use antisniffers
u can Hack ur coolege
wen sniffing is started at dt instant,mind it at dt instant all d tHings vcH odrs r doing vl display on ur compueter.

PRACTILE PART

ITS VERY EASY
4 dis u must Hv back track named software in ur computer.
downliad it and burn on a cd .
put d cd in ur computer and reboot ur computer.
ack tracH is a linux based software bt it vl play on ur windows xp or vista .
get
back track 4m Here


link 2 download back track  remote-exploit.org/backtrack_download.html


download d cd image or if u wish 2 hv usb version den u can go ahead bt better download cd image
700mb software.

------------------------>STEPS<-------------------------
STEP[1]-->

PUT BACK TRACK cd in yewr computer cr om,reboot it,back track vl start playing.


STEP[2]--->


START > BACK TRACK > PRIVILAGE EXTANSION > SNIFFERS > ETTERCAP


nw open ettercap
nw


[STEP[3]-->

SNIFF>UNIFIED SNIFFING
NW
NETWORK INTERFACE
NW OKI ETHO
I MEAN U HV 2 OKI ETHO NW
nw
scan 4 Hosts
nw mitm
nw do ok 2 arp poisioning
nw go on start and start sniffing


 nw all d data of ur dt lan or wifi arena vl display on yewr compuetr.
Hey if u stopped on arp poisiong and did oki dt
den no1 of ur clg vl be able 2 access internet.
nw jst go Hack ur clg,


USING 4 BIGGER RESULTS-->


HEY IF LUNCH TIME IN YEWR CLG IS 1:30 DEN BE AT COMPUTER ON 1:30 WEN DE ADMINISTRATOR AND ACCOUNTANTS VL LOG IN,U WILL GET DER PASSWORD AND LOGIN PAG,START INCRESING UR ATTENDENCE NW AND START REMOVING FEE DETAILS OF ENEMY OF UR CLG.

---

Lan Hacking

it can be also done thru window based cain

simple install cain (Google it)

start the sniffer
the scan for mac address
select the required ones
put on posioning
then see the results

Hacking Into Other Computer - Best Way

Hacking Into Other Computer - Best Way

                                           Hacking Into Other Computer - Best Way

Radmin Remote Administrator 3.2 - a Nice Hacking Software

Remote Administrator is the fastest remote control software. You see
the remote computer screen displayed either in a window or full
screen on your computer monitor. All mouse and keyboard functions are
transferred to the remote computer. You can work with the remote
computer as if you are sitting in front of it. According to our tests
and our users feedback Remote Administrator outperforms all other
remote controls in the speed of work.

System Requirements :
Nothing special

What's new :
Support for Windows Vista SP1; Support for Windows Server 2008; Faster speed and smooth performance; Left-hand mouse support; Support for 27 languages.

Download Software :

http://rapidshare.com/files/141494291/Radmin__Remote.Administrator__3.2.rar

How to use :

Install
Locate ip
Enjoy.